Barka da zuwa gidajen yanar gizon mu!
English
Rufi T Grid yi na'ura mai siffar Featured Image
  • Rufi T Grid yi ulla inji
  • Rufi T Grid yi ulla inji
  • Rufi T Grid yi ulla inji
  • Rufi T Grid yi ulla inji
  • Rufi T Grid yi ulla inji

Rufi T Grid yi ulla inji

Rufin grid mai sauri ta atomatik na Sihua t-bar mai sauri da kuma injin yin birgima na Cross T
No Abu Naúrar Adadi
1.11 Na'urar cire ruwa ta hydraulic sau biyu (na'urar cire ruwa ta ƙarfe) No 1
1.12 Na'urar ajiya don fenti na ƙarfe No 1
1.13 Na'urar cire ruwa ta hydraulic sau biyu (na'urar ƙarfe mai galvanized) No 1
1.21 Tsarin injina No 1
1.22 Na'urar jujjuyawar giciye da babban injin T-bar tare da tsarin tuƙi na COMBI No 2
1.31 Giciye t sandar yanke tushen tebur No 1
1.32 Bayanin sandar giciye t na matse matse, kai da wutsiya matse: 5500*2=11000, matse matse biyu:7500 No 1
1.4 Dandalin marufi No 2
1.5 Shigarwa na'ura mai aiki da karfin ruwa 11kw No 1
1.6 Babban kwamitin kula da PLC (tsarin kula da lantarki) No 1
2.31 Babban sandar t tushe na tebur yankewa No 1
2.32 Babban injin bugun t baar, seti 8 (6+2) No 1

Cikakken Bayani game da Samfurin

Alamun Samfura

Bayanin Samfurin

Sunan injin:
Na'urar yin grid mai sauri ta atomatik ta hanyar canza na'urar yin nadi guda ɗaya (COMBI).
Na'urar yin rollers ta amfani da akwatin gear
1.1. PLC za ta iya sa ido kan layin samar da T-Bar. Idan layin samar da T-bar yana da kurakurai, PLC za ta gano kurakuran. Yana da sauƙin gyarawa ga ma'aikata.
1.2. Saurin Samar da T-Bar yana cikin 0-60M/min. Matsakaicin gudu shine 36m a minti ɗaya. Minti ɗaya zai iya samar da tsawon 6PCS main-Tree 40PCS tsawon 1200 (4FT).
1.3. Bayani dalla-dalla Ana iya maye gurbin na'urorin samar da na'ura mai kauri (6) cikin mintuna 30, ana iya samar da bayanai dalla-dalla 24X32H idan aka ƙara na'urorin samar da na'ura mai kauri guda ɗaya (6).

Zane na samfurin:
Babban bayanin sandar t awanni 38 *24*3600mm/3700mm.
Bayanin sandar giciye awanni 38*24*600/1200mm.
Mun tsara injin ɗin bisa ga zane da aka tabbatar.

Bidiyo

Injin dinka mai injin ...

1. Na'urar cire fenti mai motsi biyu (na'urar cire fenti mai ƙarfe)
1.1. Ƙarfin lodi: 1500Kgs*2
1.2. Bayanin na'urar: OD 2,000 mm ID 508mm. Faɗin na'urar ƙarfe mai fenti: 100 mm
1.3. Ta hanyar miƙa birgima don ƙara matse na'urar
1.4. Injin yana tuƙa shi
1.5. Injin da ke tuƙi: 1.5kw

2. Na'urar cire na'urar cire na'urar sau biyu (na'urar cire na'urar ƙarfe mai galvanized)
2.1. Ƙarfin lodi: 3000 Kgs*2
2.2. Bayanin na'urar: OD 1,500 mm. ID 508 mm. Faɗi: 150 mm.
2.3. Ta hanyar birgima da hannu don ƙara matse murfin.
2.4. Injin yana tuƙa shi
2.5. Motar da ke tuƙi: 1.5kw

nada na'urar fenti ta ƙarfe

Na'urar ajiya don ƙarfe mai galvanized na babban injin da aka yi da sandunan t

Na'urorin da ke samar da na'urar birgima suna aiki a cikin babban gudu, don haka muna buƙatar na'urar ajiya don kare injin da na'urar rage zafi da kuma tsawaita rayuwarsu.

na'urorin da ke samar da na'ura suna aiki

Babban da kuma giciye t sandar Roll tsohon tushe

Ƙarfin injin shine 15KW, alamar ABB ce.

Kayan injin shine ƙarfe Q345-B ta hanyar maganin zafi gaba ɗaya don kawar da ƙarfin ciki don tsawon rayuwar injin.

Teburin aiki na injin yana amfani da babban aikin CNC gaba ɗaya don babban matakin daidaito, haƙuri mai faɗi a cikin 0.05mm, sarari a cikin 0.02mm a cikin raka'a na yin nadi ko fil ɗin gano wuri.

Ana sanya na'urorin yin birgima (COMBI) a kan tushen injin. Ana iya maye gurbin COMBI bisa ga girman sandunan t daban-daban.

T bar Roll tsohon tushe

Babban injin nadi na T-bar nadi mai kafawa na babban injin da kuma giciye injin nadi mai kafawa

Tashar samar da na'urori masu motsi guda 16+ 5, kayan na'urar birgima sune CR12MOV1 (SKD11) Maganin zafi na injin 58-62 HRC.

Injin yin na'urar yana amfani da tsarin akwatin gear gaba ɗaya don tsawaita rayuwar injin.

Diamita na tsakiyar shaft shine ∮40mm, kayan shine 40 CR ta hanyar kashe zafi.

Kayan firam ɗin bango: Q345 - B, sarrafa CNC, Maganin zafi.

Lambar wurin zama mai daidaita jiki: Saiti 1, ana amfani da shi ne don daidaita yanayin fuska daga sama da ƙasa, gaba da baya, hagu da dama.

Gudun layi mai tsari 0-80M/min. Sauri ko jinkirin gudu na iya zama sarrafawa ta atomatik.

Babban T-bar nadi kafa

Babban da kuma giciye t sandar tebur yankewa

Ana amfani da kayan SKD11 tare da maganin zafi na injin, Taurin kai shine HRC 58-62.

Shigar da ramukan punching guda 6.

Tsawon yankewa ramukan hawa T-BAR 3600mm, Mai haɗawa ta hanyar huda ruwa, Robot ɗin yana ɗaukar sandar t da aka huda zuwa teburin tarawa.

Babban da kuma giciye t sandar tebur yankewa

Tashar injin famfo ta Rexroth ta injin yin famfo mai girma da kuma injin yin kwali mai siffar mashin

Ƙarfin Mota: 15KW, Alamun Mota: ABB

Matsi na aikin famfo: 140 kg Gudun ruwa: 65L Alamar Rexroth ce (Jamusanci)

Silinda mai, adadi: guda 9

Mai Tarawa: 25L Alamar: OLAER (Faransanci)

Na'urar firikwensin matsi, IFM (Jamusanci) bawul ɗin lantarki: Rexroth (Jamusanci)

Alamar tacewa ita ce Parker (Amurka) 10.7, ana sanyaya man ta ruwa ko ta iska (kamar yadda aka tsara).

famfon Rexroth na'ura mai aiki da karfin ruwa

Control panel na babban da kuma giciye t mashaya yi ulla inji

Alamar PLC: MITSUBISHI (JAPAN).

Mai sarrafa yankewa: Italiyanci (SIHUA).

Ƙarfin inverter na mita: 15 KW alama: YASKAWA (Japan)

Alamar Relay da breaker: Schneider.

Alamar haɗin injin ɗan adam (allon taɓawa): KINCO, girman 10.4".

Kabad ɗin wutar lantarki, wanda aka haɗa da waya ta waje ta hanyar toshe mai sauri.

Control panel na babban da kuma giciye t mashaya yi ulla inji
Na'urar yin grid na rufin T img 7
Na'urar yin grid na rufin T img 5
Na'urar yin grid na rufin T img 8
Na'urar yin grid na rufin T img 6
Na'urar yin grid na rufin T img 1
Na'urar yin grid na rufin T img 2
Na'urar yin grid na rufin T img 3
Na'urar yin grid na rufin T img 4
Na'urar yin grid na rufin T img 9
Na'urar yin grid na rufin T ta yi kama da na'urar yin grid img 10
  • Na baya:
  • Na gaba:
    • Rubuta saƙonka a nan ka aika mana da shi

    Nau'ikan samfura

    Danna Shigar don bincike ko ESC don rufewa