Ingancin SIHUA ta atomatik da injin shiryawa na musamman wanda aka tsara Featured Image

Injin SIHUA mai inganci da kuma na'urar shiryawa ta musamman da aka tsara

BAYANIN KARFE

Ana ƙera sassan ƙarfenmu ta amfani da ƙarfe mai rufi da zinc mai zafi – Z180 & Z275UNITED FLAT STRAPS

Ana amfani da shi wajen yin firam a matsayin ƙarfafa bango wanda ke ba da juriya mai yawa ga kayan gefe da kuma don adana haɗin allon

Kauri: 0.40mm-0.9mm

Faɗi: 50mm 75mm 100mm 125mm 150mm

Tsawon: 3000mm & Tsawon da aka Musamman

Aika mana imel

Cikakken Bayani game da Samfurin

Alamun Samfura

Bayanin Samfurin

Keel ɗin ƙarfe mai sauƙi wani kwarangwal ne na ƙarfe na gini wanda ake birgima ta hanyar sanyaya ta hanyar amfani da tsiri mai inganci mai cike da sinadarin zinc na aluminum mai zafi. An yi wa bangon da aka gama da allon gypsum na takarda, allon gypsum na ado ado. Ya dace da yin ado da nau'ikan rufin gini, bangon ciki da na waje na ginin da kayan tushe na rufin da aka rufe.

Tsarin samarwa: Faɗaɗa tsarin → tsarin yin birgima → teburin yankewa → teburin shiryawa (ƙarfin wutar lantarki da aka bayar ga tsarin hydraulic) duk sassan an sarrafa su ta hanyar tsarin sarrafa wutar lantarki.

Bidiyo

Sigogi

	Rollformer	Samfuri	Haɗaɗɗen saurin samarwa *	Ma'aunin injina	Nau'in ƙugiya	Daidaituwa
D54	T4	Cross T da Babban Mai Gudu	10 m/min	0.2 - 0.6 mm	Ƙungiya mai haɗaka		Kara
D57	T4	Giciye T	31 m/min	0.2 - 0.6 mm	Ƙungiya mai haɗaka		Kara
D58D	T4	Giciye T	32 m/min	0.2 - 0.6 mm	Ƙugiya mai ƙarfe		Kara
D59D	T4	Babban Mai Gudu	34 m/min	0.2 - 0.6 mm	Ƙungiya mai haɗaka		Kara
D51	T4	Cross T da Babban Mai Gudu	30 m/min	0.2 - 0.6 mm	Ƙungiya mai haɗaka		Kara
Tsarin Aiki da Kai
DA5MR	Tsarin marufi na akwatin kwali mai gudu na babban gudu					D59D	Kara
DA5CT	Tsarin marufi na akwatin kwali na Cross T					D57, D58D	Kara

Tsarin shiryawa ta atomatik ya ƙunshi
● Tsarin juyawa ta atomatik na farko
● Bayanin haɗin kai na atomatik na biyu
● Tsarin tara bayanai ta atomatik na uku
● Tsarin watsawa ta atomatik na 4

Abu na farko na injin ɗin yin fakitin naɗewa yana haɗa bayanai da yawa ta atomatik cikin ƙaramin fakiti. Daga nan ana aika fakitin zuwa yankin haɗawa don ɗaurewa da ƙarfi. Daga nan, yana zuwa na'ura ta uku kuma yana tara waɗannan fakitin a cikin yadudduka don samar da babban fakiti ɗaya (fakitin babban fakiti). Yanzu ana iya haɗa babban fakitin da hannu ko ta atomatik zuwa na'urar ƙarshe a cikin tsarin, mai haɗa atomatik.